Efficient & Intelligent High-frequency woodworking machinery, Begin with 1993
Efficient & Intelligent High-frequency woodworking machinery
Shijiazhuang Cangao High Frequency Machinery Co.,Ltd.
Add：China's Hebei Province, Shijiazhuang City, Luquan District, Shan Yin Town, Green Island Economic Development Zone, Castle Peak Road on the 2nd
WeChat Public Address
Copyright (C)2017 Shijiazhuang Cangao High Frequency Machinery Co.,Ltd.
What are the safety operation procedures of wooden jointing machine for mirrorframe products
The wooden jointing machine for mirrorframe product is a relatively idealized machine and equipment that makes full use of the building's square timber material. It is very popular in the building materials industry. But the operation process may not be very clear to everyone. After all, the safety of mechanical equipment application is relatively important. Next, the manufacturer of wooden jointing machine for mirrorframe will take a look at the safety operation process of wooden jointing machine for mirrorframe. Which ones?
1. Operator operation process must understand the performance, main purpose and practical operation precautions of wooden jointing machine for mirrorframe product equipment. Novices are forbidden to operate independently.
2. The actual operation staff should wear appropriate clothing, gloves, long hair are forbidden during the actual operation, and the personnel who are not the actual operator of the machine should not leave their posts and approach the running machinery and equipment without authorization.
3. Before starting, check whether the safety cover is accurately positioned and reliable, and check whether there are special tools or sundries in each position.
4. When the wood is stuck with the knife, be sure to stop the equipment first, and then adjust and take it out.
5. Maintenance When using tools, do not use deformed or cracked tools, wear gloves when installing and using tools, pay special attention to the rotation position of the tool shaft when installing the tool, and need to closely contact the tool shaft ring without leaving a trace gap , Turn the screw cap tightly. When using the movable tool holder, it is necessary to make sure whether the blade fixing screw is tightened or not to prevent the blade from flying out during the whole process of cutting chips. Do not exceed the high rotation speed when the tool is running.
6. After overhauling or maintaining the wooden jointing machine for mirrorframe, please return all safety facilities or protective covers to their original places before starting the machine and equipment.
7. The actual operation staff chooses to leave the post due to some incidents. They must shut down first to avoid chatting during the operation process.
8. When abnormal operation of the machine and equipment is found, stop the operation of the equipment in time and look for special personnel for maintenance, and ensure that the power supply for safe production is disconnected during the maintenance.
9. Be sure to clean the wood dregs around the machinery and equipment before leaving get off work. It is forbidden to store wood scum on the motor and do the daily maintenance tasks of the machinery and equipment.
10. Machine and equipment full-time personnel, professional equipment, non-actual operation staff are forbidden to start actual operations, and the consequences of insisting on the operator are very serious.
The above is the whole content of "What are the safe operation procedures of wooden jointing machine for mirrorframe?", I hope you can understand.