Precautions for the use of vacuum timber dryer machine

The drying quality of the vacuum timber dryer machine is good, so that the dried wood has little deformation and no defects such as cracking. The use of vacuum timber dryer machine should pay attention to the following aspects:

1. The vacuum timber dryer machine can make the wood achieve the effect of thermal steaming, and the moisture of the wood will be drained from the inside to the outside in stages, and the dried wood will not appear deformation, internal cracks, end cracks and other phenomena.
2. A hot air recovery system can be added to recycle the exhausted hot air, accelerate the running speed of the airflow in the drying room, and speed up the drying time to improve the utilization of heat energy.
3. The drying of the wood in the vacuum timber dryer machine is a matter of haste, so the temperature should not be too fast, otherwise the wood will crack, and it is necessary to pay attention to the stacking of the wood, pay attention to the uniform heating, and also consider The flow direction of the wind, so that the hot air can circulate from the stacked wood.
4. Using vacuum timber dryer machine, it can be dried to any final moisture content required, which is not limited by natural conditions; vacuum timber dryer machine has more mature drying theory and technology, which can ensure drying quality; compared with air drying, The drying cycle is short, the production efficiency is high, and the floor area is small; the vacuum timber dryer machine equipment is not too complicated, the service life is long, the safety is reliable, and the economic effect is good.