Efficient & Intelligent High-frequency woodworking machinery
WeChat Public Address
Copyright (C)2017 Shijiazhuang Cangao High Frequency Machinery Co.,Ltd.
Maintenance method of HF vacuum wood dryer
The HF vacuum wood dryer manufacturer tells you that in order to ensure the quality of the dried wood, the humidity of the drying medium (such as the commonly used moist air) must also be controlled to obtain the effect of drying wood quickly and with high quality. This process is called wood drying. Today we Come and learn how to maintain the HF vacuum wood dryer.
The bearing is the most important part of the HF vacuum wood dryer. The full load of the HF vacuum wood dryer is basically borne by the shaft. The quality of the lubricating oil can directly affect the service life and operation rate of the machine.
The bearing of the HF vacuum wood dryer has high requirements for lubricating oil, it must be clean and the seal must be good. The main oil filling of the HF vacuum wood dryer is the rotating bearing, the roller bearing, all gears, the movable bearing and the sliding plane.
The newly installed tires are prone to loosening, and must be checked frequently, and attention should be paid to whether the various parts of the machine are working properly and the degree of wear of the wear-resistant parts. Attention must be paid to replacing the worn parts at any time.
When placing the bottom frame of the movable device, the supply and demand of dust removal should be carried out in advance, so as to prevent the HF vacuum wood dryer from being dried by stains and dust and not running smoothly.