How to maintain wooden board joining machine daily

The wooden board joining machine plays an extremely important role in the current production and construction. Let me tell you how to maintain it today?

It is not allowed to open the CNC machine tool during thunder and lightning. The instantaneous high voltage and high current when struck by lightning can easily impact the CNC machine tool, resulting in burning modules or losing and changing data information, resulting in many unnecessary losses. The manufacturer of wooden board joining machine tells you that you should ensure that there is thunder and lightning It is not possible to open the CNC machine tool from time to time, and build a lightning protection net on the roof of the CNC room. The grounding device of each CNC machine tool is kept in good condition, and the resistance of the grounding wire is less than 4Ω. Check and replace the backup data storage battery in time. CNC machine tool parameters are stored in any memory chip. When the chip is powered off or its working voltage is less than 5%, all data information will be lost or changed.
Therefore, check the working voltage of the backup data battery on time every month and replace the low-voltage battery in time. The manufacturer of wooden board joining machine tells you that if the CNC machine tool is not used for a long time, it should be connected to the power supply at least twice a week. When the CNC machine tool is not connected to the power supply, it is necessary to back up the data battery to transmit power to the chip to ensure that the data will not change. When the voltage of the battery on the CNC machine tool is too low, an alarm will generally be displayed on the display screen. When not in use for a long time, always connect to the power supply to check whether there is an alarm reminder, and replace the backup battery in time. Frequent power supply can prevent electrical components from absorbing moisture or printed circuit boards from absorbing moisture to prevent short-circuit failure or open circuit.
The above is the whole content of how to maintain the wooden board joining machine, I hope everyone can understand.