Efficient & Intelligent High-frequency woodworking machinery
WeChat Public Address
Copyright (C)2017 Shijiazhuang Cangao High Frequency Machinery Co.,Ltd.
How Curved Plywood Press Works
Curved Plywood Press is one of the main equipments in the plywood production process. It consists of three major parts: hot press body, control and drive parts (hydraulic system and electric control system), and heating system. There are many people who are not very clear about the work and principles of Curved Plywood Press. Today we will introduce it to you.
Curved Plywood Press is suitable for furniture manufacturers, wooden door factories, and wood-based panel secondary processing veneer. It is one of the main machinery of woodworking machinery. It is mainly used for hot pressing and bonding furniture panels, building partitions, wooden doors, and fire doors. Surface material veneer. In various wood-based panels such as: plywood, blockboard, MDF, particleboard, surface pressing various decorative materials, decorative cloth, veneer, PVC, etc., it can also be used for veneer drying, leveling, color decorative wood chips Flat, stereotyped, the effect is remarkable.
On the basis of negative pressure, positive pressure is added, and special glue is used. Curved Plywood Press has a linear in-position and adhesive force for the processing of PVC series that cannot be compared with negative pressure equipment. The pressure time is short, which solves the deformation problem when the negative pressure equipment processes the workpiece (especially the large-area workpiece), so that the deformation degree of the workpiece is greatly reduced.
Advanced electronic new product control is adopted, and the processing procedures of table entry, table lift, heating, vacuum, film pressure, film release, and table lowering can be automatically completed through adjustment. It is mainly powered by oil pressure and compressed air, so there must be enough air pressure and air volume. The frame is composed of steel plates as a whole, and the overall structure is reasonable. The two workbenches can be recycled or used alone. The vacuum can be adjusted to low pressure first, then high pressure suction and cover, and the film pressure can reach 0.4MPa. Through adjustment, the product can achieve the desired effect.
The above content is the relevant introduction to the knowledge of Curved Plywood Press shared with you. I hope this introduction can help you better understand and understand Curved Plywood Press.